Buckets |
Configuration and Performance |
Application |
Standard bucket |
Q345 , Standard thickness plate and high quality tooth |
Light working environment ,such as the excavation clay,sand and loamy gravel. |
Heavy duty bucket |
Q345, thicker plate ,higher quality tooth plate which can lasting the using time. Choose domestic wear-resistant plate as cutting edge and side cutters, in order to reach high abrasion and bending ability |
Light working environment ,such as the excavating and loading of hard soil, soil with soft rock, and soft rock . |
Rock bucket |
Q345, Add strengthen plate on the bottom, add side protective plate to reach high abrasion and bending ability, and choose the domestic bucket tooth and adapter for the bucket . |
Heavy working environment, such as the loading of hard stone and ore after the balsting . |
Tilt bucket |
With all features of the mud bucket, but can be swung to left and right to finish more difficult work; changeable cutting edge |
slop-surface trimming, waterways dredging, water ditching, etc. |
Mud bucket |
With two cutting edges, large width, so large volume. |
Where more volumes for slope-surface trimming, waterways dredging, and water ditching are needed. |
Skeletion bucket |
Similar to the standard bucket in design, with sieve bottom, larger volume |
Digging and separation of materials with different sizes, digging and sorting completed at the same time, widely applied to municipal work. agriculture, forestry, water conservancy, earthwork, etc. |
Dustpan bucket |
The sharp is very wide and shallow, the bottom is flate and add wear strips. |
use for marble, mine, and the other big stones load and excavation. |
Grab bucket |
Use good quality plate, key parts were reinforced to get long using life. |
Bucket works with thumb to grab wood, stone and construction waste etc, reduce the possibilities of stuffs falling out from the bucket |
Ripper bucket |
Installed with high strength ripper teeth, strong digging capacity; convenient for digging and loading at the same time, high efficiency. |
Digging and breaking of hard earth, sub-hard stone and land waste. |
excavator grab |
360 degree unlimited roate, can be grab all around |
Grab wood, stone, metal waste, construction waste, household garbage etc. |
Hydraulic scissor |
Tungsten carbide teeth can be changed in minutes. durable main plates can extend long use time for it. |
Tackle anything with the hydraulic cutter break-up huge chunks of material, cut reinforcing wire and produce a grade suitable for re-use on site. Ideal for use on big, tough awkward, or heavily reinforced pieces, which can not be put through static type crushing plants. Suitable for both primary and secondary demolition tasks. |
Clamshell bucket |
The clamshell bucket which fitted to an excavator have powerful digging characteristics. Ideal for earth moving, ground works and road construction we have a range of shells available for different applications. The clamshell bucket is driven by hydraulic cylinder to open and close, easy operation and good control of the strong digging force, especially good for limited working space. |
Apply to groove, such as the foundationditch limited, space mining and mud, sand, coal, gravel loaded, and can also be used to ship, train, automobile loading and unloading the above material |